These are a set of 6-32, T15, black oxide screws cut to length for the Trijicon RMR and Trijicon SRO. These are custom made screws specific to our optic plate and do not have exposed cut metal on the bottom.
These screws are compatible with both Gen 1 and Gen 2 V9 optic plate variants. We suggest degreasing these thoroughly (along with the threads in the plate) and using blue Loctite (not red) when installing your optic.
THESE ARE FOR SECURING THE OPTIC TO THE PLATE, NOT THE PLATE TO THE SLIDE. Do NOT use the Trijicon supplied screws to mount your RMR or SRO to your plate.
Recommended torque specs for this specific screw is 22 in lb, but we've been able to secure them all the way up to ~45 in lb. Use caution and verify that your screw driver's head is fully seated before torquing.
